WMS Controller
Save Energy! Save Water! – led us to develop these rugged control systmes.
WMS Controller is a fully automatic Electronic system for water pumps. It basically Performs two functions :
- Operates the pump automatically depending upon the levels of water in the underground & overhead tanks
- Protects the pump from electrical & pumping faults.
Power Supply:
230 VAC ± 10%
Valve Operating Voltage: (Optional)
24 VDC or 230VAC User Selectable
(Refer Selection Table)
Power Consumption:
1.2 watts maximum for Controller
Relay rating:
415 VAC 2.5A
Sensors: Conductivity Principle.
Nickel plated copper alloy for Domestic Water
SS304 (Optional) for corrosive liquids.
(Refer Selection Table)
Sensor Cable: 4 core shielded Armoured with UV protection & Rodent Repellent.
Dry run trip delay:
90 seconds approx.
Pump (Motor) Rating:
1φ, upto 1HP/7.5HP
3φ, upto 1HP/7.5HP
(Refer Selection Table)
SPP trip delay:
3 sec. to 10 mins.
Enclosure:
ABS, IP65, Wall Mount.
MS, Wall Mount
(Refer Selection Table)
One/Two Tank Control
Full Function Display
Dry Run Protection
Auto/Manual Changeover
Single Phasing Protection
Start Delay
Pump1/Pump2 Changeover